物性表A78P4766物理性能測試條件測試方法測試結果單位熔體體積流動速率190°C/21.6kg110cm3/10min收縮率MD：注塑ASTMD9551.0%邵氏硬度AISO 761980Shore A邵氏硬度DISO 761931Shore D機械性能測試條件測試方法測試結果單位拉伸強度DIN 5350434Mpa****拉伸模量DIN 535044.0Mpa300%拉伸模量DIN 535047.0Mpa伸長率斷裂DIN 53504670%撕裂強度ISO 34-176N/mm磨耗ISO 464940mm3壓縮yongjiu形變24h 23℃ISO 81524%壓縮yongjiu形變24h 70℃ISO 81542%Abrasion2ISO464940mm3熱性能測試條件測試方法測試結果單位熔融溫度范圍下限Huntsman127°C熔融溫度范圍上限Huntsman156°CTMA3High:635.0μm內部方法190°CLow:635.0μm內部方法165°C彈性體測試條件測試方法測試結果單位拉伸應力2****應變ASTMD4125.79Mpa****應變DIN535045.20Mpa300%應變ASTMD4129.65Mpa300%應變DIN535048.00Mpa抗張強度2斷裂ASTMD41227.6Mpa拉伸應力2斷裂DIN5350430.0Mpa伸長率2斷裂ASTMD412800%斷裂DIN53504800%撕裂強度2ASTMD62471.8kN/mISO34-140kN/m壓縮yongjiu變形223°C,24hrASTMD39520%70°C,24hrASTMD39540%23°C,24hrISO81520%70°C,24hrISO81540%硬度測試條件測試方法測試結果單位肖氏硬度邵氏A,注塑ASTMD224082邵氏D,注塑ASTMD224030邵氏A,注塑ISO86882邵氏D,注塑ISO86830可燃性測試條件測試方法測試結果單位UL阻燃等級UL94V-0縮 水 率(Shrinkage) U-85A~U-90A1.4~1.6 U-95A~UH-71D0.8~1.2 UF-85A~UF-90A1.4~1.6 UF-95A~UF-64D1.0~1.2 U-75AP~U-85AP1.6~2.0 UB-90A~UB-60D1.1~1.4 UE-60A~UE-70A
